200-amp panel upgrade
Old 60 or 100-amp panels and fuse boxes replaced, with the permit, utility coordination and inspection handled.
Sample imageResidential electricians · Panels, EV chargers and lighting
Safe, tidy electrical work for your home.
Panel upgrades, EV chargers, pot lights and repairs, done to code, with permits pulled and inspections booked when the job needs them.
- LicensedAnd insured
- PermitsPulled and inspected
- EV chargersLevel 2 installs
- Flat-ratePrices
Services
Electrical services
Panel upgrades, EV chargers, pot lights and repairs, done to code, with permits pulled and inspections booked when the job needs them.
EV charger install
Level 2 chargers on a dedicated 40 or 60-amp circuit, with a load calculation so your panel isn't overloaded.
Pot lights and fixtures
LED pot lights added to existing ceilings through small openings, plus fixtures, fans and dimmers.
Troubleshooting and repairs
Tripping breakers, dead outlets, flickering lights and warm switches found and fixed.
Renovation and basement wiring
Kitchens, bathrooms, basement suites and additions wired to code and ready for inspection.
Safety inspections and upgrades
Knob-and-tube and aluminum wiring checks, GFCI and AFCI protection, and smoke and CO alarms.
- Licensed and insured
- Permits and inspections handled
- Upfront flat-rate pricing
- 2-year workmanship warranty
- Drywall openings patched
Prices
Starting prices
Service and repairs
Service call and diagnosisFirst 30 minutes includedfrom $129
Outlet or switch replacementfrom $145
GFCI outlet installfrom $175
Light fixture or ceiling fan installfrom $195
Upgrades
200-amp panel upgradefrom $3,800
Level 2 EV charger installCharger supplied by you or usfrom $1,150
LED pot lightsPer light, 6-light minimumfrom $165
Whole-home surge protectorfrom $425
Starting prices. Your electrician confirms a flat-rate price on site before any work starts. Permit fees are extra where required.
How it works
How it works
Tell us about the job
Call or send photos of your panel and the area. Many jobs can be priced from photos.
Flat-rate quote
We confirm the price in writing, pull any permit and book a start date.
Done to code
We do the work, test every circuit and patch any openings we made.
Inspection and sign-off
When a permit is needed, we book the inspection and send you the final sign-off.
Our work
Recent projects
Sample image
Sample image
Sample imageStock photos for this fictional business. Your site shows photos of your own work.
Sample imageAbout us
Work you never have to think about
Lumenhart is a small team of licensed electricians who have worked on homes in Your City for 14 years. We pull the permit when the job needs one, test every circuit before we leave, and patch the drywall openings we make. You get a flat-rate price in writing before we start.
- Licensed And insured
- Permits Pulled and inspected
- EV chargers Level 2 installs
- Flat-rate Prices
Service area
Where we work
Serving your city and the towns nearby.
- Downtown
- Northside
- Riverside
- Oak Park
- Cedar Heights
- Southgate
- Nearby towns
Reviews
What customers say
They handled the permit and the utility disconnect for our panel upgrade, and the inspector signed off the same week.
Kevin H. · 200-amp panel upgrade
The charger was installed in an afternoon and they checked our panel load first so nothing trips when the dryer runs.
Mei L. · EV charger install
Ten pot lights in the kitchen with tiny patches you can't see once painted. Very tidy crew.
Jordan B. · Pot light install
FAQ
Common questions
Do I need a panel upgrade for an EV charger?
Not always. We do a load calculation on your current panel first. Many 100-amp homes can add a charger with a load management device instead of a full upgrade.
Do you pull permits?
Yes, whenever the job requires one, such as panel upgrades, new circuits and basement wiring. We book the inspection and send you the sign-off.
Can you add pot lights without tearing open the ceiling?
In most homes, yes. We fish the wires through small openings and patch them so they're ready for paint.
My breaker keeps tripping. Is that dangerous?
It means the breaker is doing its job, but something is wrong: an overloaded circuit, a bad device or a short. If you smell burning or see scorch marks, turn the breaker off and call us.
Should I replace knob-and-tube or aluminum wiring?
Often yes, and many insurers ask for it. We inspect it first and tell you what needs replacing now and what can wait.
Do you take emergency calls?
During business hours we fit in urgent safety calls the same day, like burning smells, sparking outlets or a partial power loss.
Visit
Hours and location
| Mon–Fri | 7:30am–5:30pm |
| Sat | 9:00am–2:00pm |
| Sun | Closed |
Map (sample)
Get a flat-rate quote
Call, email or send the form and we'll get back to you, usually within one business day.
This is a sample website for a fictional business. The phone number, email and address are not real, and the photos are stock images.